Hydraulic Motor

The fixed displacement plug-in motor A2FE is equipped with a standard axial tapered piston rotary group of bent axis design.

Hydrostatic plug-in motors are intended primarily for installation in mechanical gearboxes, e.g. track drive gear boxes.

The design of the motor with the mounting flange in the centre of the housing allows it to be almost fully integrated into a mechanical gearbox to give an extremely compact unit.

– complete unit, ready assembled and tested
– easy assembly, simply «plugs-in» to mechanical gearboxes
– no installation tolerances to consider
– Interchangeable with original Rexroth motor of the same model.

A2FE63/61W-NAL100, A2FE80/61W-NAL100, A2FE90/61W-NAL100, A2FE107/61W-NAL100 
A2FE125/61W-NAL100, A2FE160/61W-NAL100, A2FE180/61W-NAL100,

Variable motor A6VE with an axial tapered piston rotary group of bent-axis design for hydrostatic drives is available for open and closed circuits. It can be used in both mobile and stationary application areas. The wide control range enables the variable motor to satisfy the requirement for high speed and high torque. The displacement is infinitely variable from V_{g max} to V_{g min} = 0. The output speed depends on the flow of the pump and the displacement of the motor. The output torque increases with the pressure differential between the high and low pressure side and with increasing displacement.

Features

• Series 63, Size 107