Hydraulic Valves

Product Details:

We are engaged in offering Loader Control Valve, which is extremely praised in the market. Owing to high demand, professionals make these products in varied patterns.

DBT / DBWT PRESSURE REMOTE RELIEF VALVE

DBD PRESSURE RELIEF VALVE

DB10 PILOT OPERATED PR RELIEF VALVE

DBW10 PILOT OPERATED PR RELIEF VALVE

Pressure relief valve types ZDB and Z2DB are pilot sandwich type pressure controls. ZDB versions offer single port pressure control, while Z2DB models offer dual port pressure control. Z2DB models can be configured as either port relief or cross port relief. The ZDB program offers multiple spring options.

Features

• Sizes 6 and 10
• For mounting:
  – Size 6: Porting pattern according to ISO 4401-3, NFPA T3.5.1M R1,
  and ANSI B93.7 D 03
  – Size 10: Porting pattern according to ISO 4401-5, NFPA T3.5.1M R1,
  and ANSI B93.7 D05

• Four pressure ratings: 50 bar (725 PSI), 100 bar (1450 PSI),
  200 bar (2900 PSI), and 315 bar (4600 PSI)
• Five pressure relief functions:
  – A → T; P → T; B → T; A → T as well as
  – A+B → T; A → B and B → A

• Adjustment type:
  – Rotary knob with scale

Additional Information:

• Minimum Order Quantity: 1 No

Series LSC
2-way cartridge valves with
spool position monitoring
Size - LSV 16,25,32,45,50
2 way cartridge valve with spool position monitoring,
provide feedback to inducive switch signal to
sensor spool correct position, to secure equipment
operating under safety operation according to
hydraulic circuit design and detection requirement.
When inductive position switch feedbacks error
signal, the equipment stop operating immediately to
ensure operator safety

Additional Information:

• Minimum Order Quantity: 1 No

LM-2
LM-3
LM-4
Monoblock Directional Control valve
Max pressure: 315bar
Features:
High efficiency, long service life, high strength cast iron,
compact construction, low pressure drop, chioce of various
ports, choice of six spool types, NBR (Buna-N) Seal (Standard)
FPM ( Viton) Seal (ON request), choice of varios operation
methods such as manual hydraulic pneumatic
Nom Pressure: 250 bar

Additional Information:

• Minimum Order Quantity: 1 No

DR (50 SERIES) PILOT OPERATED PRESSURE REDUCING VALVE
3DREP6 PROPORTIONAL PRESSURE REDUCING VALVE 3 WAY DESIGN
DRE / DREM PROPORTIONAL PRESSURE REDUCING VALVE
Models ZDR are 3-way direct operated pressure reducing -relieving valves. They maintain a “reduced” pressure in a branch circuit and permit “relieving” pressure spike occurrences in the reduced branch circuit. Options for pressure ranges and operator adjustment options are within the scope of the modular reducing valve portfolio.

Additional Information:

• Minimum Order Quantity: 1 No

Solenoid operated directional
valve with spool position
monitoring
The proximity sensor monitor the working position of
spool accurately. Either PNP or NPN can be chosen
for the sensor. Rapid response, high factor of safety,
long service life. Compact structure make it convenient
for building up and wiring. The position of the
proximity sensor is suitable for the double solenoid
as well as for the single one.

Additional Information:

• Minimum Order Quantity: 1 No

Sv/sl hyd pilot operated check valve
Z2fs double throttle check valve
Dv/drv throttle check valve
Rvp check valve
Z1s check valve
Size 6, 10,16,22
Models z2s are pilot operated check valves in a sandwich plate design. They provide line contact closure in one or two actuator ports, even during idle periods. Piloted to open, utilizing a pressure signal from the opposite actuator port provides a self-contained function.
Features
    Sizes 6 to 22
    Porting pattern according to iso 4401-3, 5, 7, 8; nfpa t3.5.1m r1, and ansi b93.7 d 03, d 05, d 07, d 08
    For the leak-free isolation of one or two actuator ports
    Various cracking pressures

Additional Information:

• Minimum Order Quantity: 1 No

Directional valves type WEH are solenoid operated directional spool valves. They control the start, stop, and direction of a flow. These pilot operated directional valves consist of a pilot control valve and main stage with spring or hydraulic centering options. Additionally, the pilot and drain configuration may be selected. A full array of spools are possible with variations in voltage and electrical connection, all within the program. Flow and pressure rates from 4000 PSI to 5000 PSI and 42 GPM to 120 GPM cover a wide range of applications.

Features:

• Sizes 10 to 22
• Porting pattern according to DIN 24340 form A and ISO 4401-5, 7, 8; NFPA T3.5.1M R1, and ANSI B93.7 D 05, D 07, D 08
• Wet-pin AC or DC solenoids
• Spring and/or pressure return of the main spool to its initial position
• Spring centering (size 10, 16, 22)
• Spring or pressure centering (sizes 16 22)
• Electrical connection as individual connection or central connection
• Optional switching time adjustment
• Stroke limitation of the main spool, optional
• CSA certified part numbers available in all sizes

Additional Information:

• Minimum Order Quantity: 1 No

DZ..DP DIRECT OPERATED PRESSURE SEQUENCE VALVE
Sizes 10, 25, 32

• For subplate mounting (“P”): Porting pattern to DIN 24340 form D and ISO 5781
• For block installation (“C”)
• Suitable for use as preload, sequencing and switchover valve
• 4 optional adjustment types:
  • Rotary knob
  • Sleeve with hexagon and protective cap
  • Lockable rotary knob with scale
  • Rotary knob with scale
• Check valve, optional

Additional Information:

• Minimum Order Quantity: 1 No